Solar LED floodlight with PIR sensor, 90°, 5W, 5500K, IP65

The LED solar floodlight is a very successful solution for façade and garden lighting. The photovoltaic panel and the rechargeable battery ensure an independent off-the-grid power supply. The floodlight has a built-in PIR movement sensor and a photocell. Advantages: Seven operational modes in accordance with the customer’s most popular preferences. Solar panel from monocrystal silicon, characterized with higher efficiency. They achieve greater results in comparison with the polycrystal panels with the same size. Mounting bracket, allowing the panel to be mounted under a different angle. The solar panel and the floodlight are equipped with water resistant protector IP65 (Plug and Play). Extension cable (3 meters) between the panel and the floodlight that allows a greater choice of an installation spot. PIR movement sensor with 12-meter operational radius. This helps to save the battery’s energy, as in sensor mode the floodlight will work with maximum brightness only if a movement is detected. In the meantime, the floodlight only uses the “night light” mode (5% brightness). User friendly IR remote control for quicker and easier operation. Indicator for the level of the battery charge. Anti-moisture membrane valve that allows the condensed moisture to be taken out from the floodlight. Polycarbonate optical system on each diode chip, directing the light in narrow 90° angle. Rechargeable accumulator battery LiFePО4, characterized with longer life (more on/off cycles). This technology is safer than the Li-Ion type batteries. The floodlight could work 3h in max. power and 14h in Auto regime.  Short charging time 4-6 h. LED FLOODLIGHT Max. Power: 5 W Max. luminous flux: 800 lm max Night light: 40 lm Corelated colour temperature: 5500 K Colour rendering index: Ra≥70 Beam angle: 90° Dimensions: 205*170*44.5mm IP rate: IP65 Warranty: 2 years SOLAR PANEL Type: Monocrystalline Dimensions: 210*200*17mm Open circuit voltage: Voc= 6V Short circuit current: Isc=1.1 A Maximum power voltage: Vmpp= 5 V Maximum power current: Impp= 1.0 A Maximum power: Pmpp= 5 W Extension cable: 3 m BATTERY Type: LiFePo4 Capacity: 3.2 V, 4000 mAh Charging time: min.4-6 h Working time: max. 14 h (Auto mode); max. 3 h (high bright) PIR SENSOR Detection distance: max. 12 m Ambient light: <10 lx  Detection range: 120°