Motion sensor for building-in

The motion sensor SDV is a passive infrared sensor, which detects (monitors) infrared rays (warmth) emitted by the objects that fall into its detection range. The sensor turns on / off the load, connected to it, depending on the change of the thermal background in the detection area. This is why it is not recommended to install the motion sensor SDV in areas with great temperature amplitude – near air conditioners or heaters. Infrared sensors are normally used as motion sensors. The sensor is intended for building-in. It can control LED lighting and incandescent lamps. It has an IP20 protection rate, suitable for environments with normal levels of moisture and dust. It has the following features: Adjustable time delay and ambient light threshold.

Voltage AC	220~240V
Warranty	5 years
Frequency	50~60Hz
Maximum load (active/reactive)	1200/300W
Protection rating	IP20
Working temperature range	20 ⁰C ÷ +40 ⁰C
Mounting hole	62mm
Time delay	10 sec. – 15 min
Detection distance	6m
Installation height	2.2 – 4m
Ambient light	<3-2000lx
Detection range	360°
Self consumption	0.5W
Detection moving speed	0.6-1.5m/s
Working humidity	<93%RH